47
top 50 comments
sorted by: hot top controversial new old
[-] AlternateRoute@lemmy.ca 39 points 1 year ago

I specifically purchase noise cancelling headphones / earbuds now since it makes it easy to listen at MUCH quieter levels. I have done some tests with the noise cancelling disabled and setting the volume and with it on.. It really makes a huge difference as I am not cranking it up to drowned out noise on transit or walking down the street.

[-] pianoplant@lemmy.world 7 points 1 year ago

Came here say this. Absolutely agree. Being able to reduce background noise is huge.

As a side point - having a car that's quiet has really allowed me to enjoy music at a much more reasonable level when driving as well.

[-] Carter@feddit.uk 5 points 1 year ago

I bought some Sony XM4s because I'd heard this theory before but I found noise cancelling barely makes a difference.

[-] MrFunnyMoustache@lemmy.ml 6 points 1 year ago

Which Sony XM4s are you talking about? Sony is terrible at naming their products, the WH-1000XM4 are noise cancelling overear headphones, while the WF-1000XM4 are in ear ones. If you're talking about the earbuds, try different tips.

[-] RaspberryRobot@lemmy.world 7 points 1 year ago

Yeah I have the WH-1000XM3s and the noise cancelling made a substantial difference to my listening volume (like 30-40% quieter on average).

[-] Carter@feddit.uk 2 points 1 year ago

The overear headphones. The ANC just made no difference.

[-] AlternateRoute@lemmy.ca 2 points 1 year ago

Odd I have tested them in stores before and they are typically well rated.

However I was using Bose QC II for a few years and now I use the apple air pod pros.

For in ear seal is really important for nose canceling and apple also provides a test mode / app on apple devices to test that sound isn’t leaking substantially.

Makes no difference in a quiet environment but will easily cancel out a loud air conditioner or most traffic noise from passing cars.

load more comments (2 replies)
[-] wildbus8979@sh.itjust.works 24 points 1 year ago
[-] DeltaTangoLima@reddrefuge.com 11 points 1 year ago* (last edited 1 year ago)

It's 1 ~~better than 10~~ louder, innit?

[-] kambusha@feddit.ch 4 points 1 year ago

Why don’t you just make ten louder and make ten be the top number and make that a little louder?

But this one goes up to 11

load more comments (1 replies)
[-] Ocelot@lemmies.world 15 points 1 year ago

WHAT? SORRY I CANT HEAR ANYMORE

[-] NENathaniel@lemmy.ca 13 points 1 year ago

I try to target under 70db to protect my ears. Some earbuds and DAC's can show you a db estimate

[-] MrFunnyMoustache@lemmy.ml 2 points 1 year ago

How can they estimate it with a standalone DAC? I can understand that it can be calibrated when using a wireless headphone/earbuds (although it probably would be different depending on what the shape of the ear is, and what tips/pads you're using), but for a standalone DAC it sounds really strange since different headphones have different efficiency and it would be impossible for the amp to know what it would be, right? I have very efficient IEMs that get very loud even on very low volume when plugged to an ordinary USB-C DAC (one click above zero is a bit too quiet, another click is too loud), but on some larger overear headphones I have, even the max volume on the same DAC will be pretty underwhelming.

Even if the amp can detect the impedance of the headphones, it won't know the energy conversion efficiency... right?

I'm guessing the dB is not absolute volume, but relative dB (to measure amplification), so if you plug the same headphones into different amps, and give them the same source and the same dB setting, you probably will have different listening volume at the end.

I'm just a layman, so I might be missing something crucial.

[-] NENathaniel@lemmy.ca 2 points 1 year ago

As someone else said, I'm referring to the Qudelix where you can input the Impedance and Sensitivity manually

[-] thrawn@lemmy.world 2 points 1 year ago

I believe you’re correct. DACs obviously can’t determine volume at all, but amps can try to use the impedance to create an estimate.

This probably isn’t accurate though. If you really want a good estimate, you would have to calculate it with current voltage output and the specs of the headphones/IEMs in question.

I’m just a hobbyist too, but my headphones are extremely inefficient so I’ve spent some time looking into this. Too bad we don’t have oratory here

load more comments (3 replies)
load more comments (1 replies)
[-] Sequentialsilence@lemmy.world 11 points 1 year ago

Sound engineer here. Please protect your ears people, there’s no way to reverse hearing damage.

[-] xtremeownage@lemmyonline.com 10 points 1 year ago

depends.

In the middle of angry-programming? The linkin park will be turned up to 80%. I want to make sure Chester's screams wakes the dead.

Business as usual? around 20%. Enough to drown out external noises.

[-] yenguardian@lemmy.blahaj.zone 8 points 1 year ago

30-40%, but depending on what I'm listening to, I may temporarily crank it up. I think this question kinda depends on sound hardware, though.

[-] nothacking@discuss.tchncs.de 8 points 1 year ago

As quietly as possible, you don't notice hearing damage until it's too late to do anything about it.

[-] user224@lemmy.sdf.org 8 points 1 year ago

10-15% on earphones. However, that doesn't really mean anything. Different sound card and headphone combination will produce different loudness at same levels.

[-] money_loo@1337lemmy.com 8 points 1 year ago* (last edited 1 year ago)

I use the headphone safety feature of my phone to limit it to 80dB. Anything higher and you’re risking permanent hearing loss.

Guide.

[-] JoeBidet@lemmy.ml 8 points 1 year ago
[-] Sir_Kevin@lemmy.dbzer0.com 7 points 1 year ago

I'm just going to take this moment to remind everyone not to destroy their hearing. Back in highschool I used to blast my ears with headphones at maximum volume and go to loud venues without hearing protection. I've been permanently listening to EEEEEEEEEEEEE ever since. That was 25 years ago. It never goes away folks. Stay safe!

[-] Xylight@lemmy.xylight.dev 6 points 1 year ago* (last edited 1 year ago)

20% typically. I prefer to be able to hear my surroundings clearly still

[-] BackOnMyBS@lemmy.world 5 points 1 year ago
[-] meathorse@lemm.ee 2 points 1 year ago

A 5 is the only exception to it being an even number

[-] Mouselemming@sh.itjust.works 5 points 1 year ago

I listen at a low volume. I'm usually doing something else as well, so loud music is too distracting and irritating. I'm old, and I can still hear very well except for spousal deafness.

I love that the font size on this post is twice as big as all the others.

[-] datavoid@lemmy.ml 4 points 1 year ago

Some very arbitrary answers up in here

load more comments (3 replies)
[-] eezeebee@lemmy.ca 4 points 1 year ago
[-] Rocky60@lemm.ee 3 points 1 year ago

I primarily listen to music in my car and it’s usually as loud as I can stand.

[-] TheMightyCanuck@sh.itjust.works 3 points 1 year ago
[-] moreeni@lemm.ee 3 points 1 year ago

20-40% when I'm at home and there are no noises that interrupt the sound. 50-75% when I'm outside and can't hear anything on lower levels. I try to keep this stuff as quiet as possible so as not to damage my hearing

[-] AceQuorthon@lemmy.dbzer0.com 3 points 1 year ago* (last edited 1 year ago)

Depends. My IEMs have higher impedance than your usual pair of headphones, and then it also depends on what I'm listening to from my self-ripped .flac library. Right now I am listening to Savage Amusement by Scorpions and I can listen to it enjoyably at 65 out of 120 on my Walkman. The Dark Side of the Moon by Pink Floyd is a tad bit quieter so on that album I have 75. Usually it's around this volume range, but sometimes if it's a raw grimey death metal album I have to go even higher.

tl;dr:

It mostly depends on how loud or quiet the album I'm listening to is.

[-] populustree@lemmy.blahaj.zone 3 points 1 year ago

on speakers? reasonable minus a notch or two

on headphones? cranked

[-] SirQuackTheDuck@lemmy.world 2 points 1 year ago

I'm exactly the opposite. I've got fancy ass speakers for a reason, I'm gonna use them.

^(yes, I've checked with the neighbours)

[-] Moghul@lemmy.world 3 points 1 year ago

WHAT?

Jokes aside, just over 50% system volume in general with apps and headphones maxed out. My hearing is so/so. I wish it were below 50 but it's just too quiet like that

[-] johnyrocket@feddit.ch 3 points 1 year ago

With headphones and speakers it is always as quietly as possible since I already have ear damage, I don't want more.

[-] counselwolf@lemmy.world 2 points 1 year ago

Full on speakers, around 50% to 80% on IEMs/headphones; depends on the max volume I can do without getting tinnitus.

[-] jeanofthedead@sh.itjust.works 2 points 1 year ago

I use Reduce Loud Sounds on the iPhone with my AirPods Pro to reduce the maximum volume to 80dB so that I don’t damage my hearing. That way, I can crank the volume buttons to maximum without having to think about it, knowing that it will be safe.

[-] BrikoX@lemmy.zip 2 points 1 year ago
[-] BigBananaDealer@lemm.ee 2 points 1 year ago

i usually keep it 2-4 clicks away from the limit that phones have. depends on how loud or quiet the album im listening to is. i used to have it all the way to the limit but that was when i worked at a much more noisy job

[-] MrFunnyMoustache@lemmy.ml 2 points 1 year ago

Very quiet, I hate anything that's loud.

load more comments
view more: next ›
this post was submitted on 14 Sep 2023
47 points (87.3% liked)

Asklemmy

43399 readers
801 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS