cross-posted from: https://lemmy.world/post/5265624
I made this about a year ago and it's one of my favorite creations. Even though I made a mistake in measuring the bottom and had to cut out some slots. One day I'll print it again, but it used a ton of filament and took forever last time.
How much fucking rice do you make
Lol, I'm Korean so...a lot
I'm convinced this was all so they could flex about having 3 rice makers.
lmao, only one now, but ive been through a bunch and saved the scoops. The one I have now though is super nice and cost enough to buy a dozen cheaper ones though, lol
Zojirushi 🤘
My rice cooker sings the song of it's people.
You know it!
Countdown until someone posts that you are already dead from bacteria in the layer lines.
I so need to do this for my toolboxes. I know it would take a long time, but it would end up saving me so much more time.
https://lemmy.world/comment/3542950
Yup, didn't take long. I still need to get a nice toolbox, but when I do, I'll definitely be doing something similar.
Each thing looks like it will only fit in the space designated for it, so naturally my kids will just toss the silverware in the drawer off to the side. There is no way in hell they are going to keep it organized.
That top left section already has "screw it, the rest goes here" energy
Definitely, always need a catch all spot
Haha, luckily I live alone and can keep it tidy.
Everything fits in the knife and chopstick sections, or the accessory section.
Is there more/less a risk of using micro plastics with food stuff than traditional plastic?
I would really love to use a 3D printer for all of these home organization tasks but am worried of increasing consumption of micro plastics.
https://en.wikipedia.org/wiki/Polylactic_acid Is the most commonly used printing material. I would rather eat that than just about any other "food safe" traditional plastic in my kitchen.
There are other concerns about the actual food safeness of printed objects because of their physical structure being a harbor for bacteria and such, but ingestion isn't one of them.
Finally someone not screaming "micro plastics! Bacteria!". Yes it's an issue for some things. Like I wouldn't be eating with 3d printed utensils or storing food in 3d printed containers, but I just can't imagine my silverware is collecting enough microplastics from sitting there that will do more damage than all the other microplastics already in me from everything else.
“PLA Filament” isn't pure PLA, it can contain lots of additives that aren't food safe.
I was going to suggest posting this to the homeorganisation community, then I realised you're the guy who made that community as well; you're really prolific at these custom organisation prints, I'm impressed!
I have to ask are you a 3D designer by profession or is this just a hobby?
Haha that's great. Thank you. No it's just a hobby. I do have a background in graphic design and a huge interest in technology and computers and I guess I've just married the two into a hobby.
I had no desire for a 3D printer until this post.
This is one of my favorite things to hear. I love sharing not only what 3D printing is capable of, but just in general things that I feel like improve life even in some small way. Reach out of you want to take that desire further and have any questions on how to get started or anything.
Now I want to 3d print, just to make one for my house!
If you are interested at all, the hobby has never been cheaper to get into. <$200 gets you a printer and several spools of filament to learn with.
3D printed stuff is not geat for hygienic reasons because the little groves accumulate dirt over time and is hard to clean. Did you coat the print somehow?
Oh man, how nice is it to hip-slam the hell outta that drawer, knowing your forks and spoons will be lovingly cradled
I've seen these extra long chopsticks in stores before. What are they used for, other than utensils for giants?
Cooking, usually in a wok. My mom got them for me a couple years ago. I've yet to use them even though I do cook with chopsticks often. They're just too big.
My god how did I never think of this. I need to do this yesterday.
The sort of prints that become part of your life are my favorite.
How did you print such a large item? Is it glued together somewhere?
Yes it's 6 pieces "welded" together. I use a soldering iron to "weld" along the seams.
I've tried that before, but it always hardens before I put the pieces together. How do you do it?
Are you trying to melt and then stick together like glue? I place the 2 pieces together and then run a soldering iron down along the seam and "weld" the 2 pieces together while they are touching eachother.
Good tip, you can also add extra filament. You can use CA glue to keep parts in position while welding. You might find that CA glue is enough tho
I've had a hard time getting super glue to bond PLA+ and I think I had a hard time with white PET-G too.
Edit: super glue is CA glue. Right?
Oh! Yup, that's exactly what I was doing, melting them and then trying to stick them together. Is the seam invisible when you're finished, using your welding method? Does it require touch-up? Is it strong enough, considering only the outer edges are fused?
Yeah, it will harden way too fast to do that. Like the other commenter said, use glue to stick them together, then you can weld the seams, and also add some extra filament if you want a smoother seam. I just welded that print as it's all held in pretty tight in the drawer. There's almost no gap around the outside at all. I just welded and there is a visible seam, but it's minor and I don't need it to be perfectly smooth. If you wanted it to be perfectly smooth, I'd add filament and then sand it flat and possibly paint if you felt inclined.
As far as strength, like I said for this print it didn't need to be, but it really depends on what you're making. Use your best judgement, CA glue bonds very well. I use clear gorilla glue myself. It doesn't expand like normal gorilla glue. But yeah, I use a combination usually depending on what it is. Like I said, just use your best judgement and definitely keep the parts together and weld along the seam instead of melting and trying to stick together, lol.
Thanks for all of the tips! Sticking multiple pieces together has been a real sticking point for me.
Haha, nice!
So envious
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible