I'm looking to replace my Rock 5B running Android TV (the OS jank has finally gotten to me) with an x64 Linux HTPC coupled with an Rii remote.

What distro would one recommend for a "Jellyfin native" client setup? I've run Kodi with the Jellyfin plugins before and not been a fan of the experience.

I've never had to use Windows 11. I have Windows 10 on my main machine and toy around with different Linux distros on my spares.

Now that I'm building a computer for my folks, I'm faced with the real problem that Windows 11 is going to be a big shift for them (also using windows 10) and it's going to contain so much crap (Copilot, Start Menu ads, etc) that is going to ruin the experience/overwhelm/turn them off.

I've read, with passing interest, about the myriad of "debloated" Windows installs, but never took a serious look at what is going on and what is good. Here's where I hope c/technology can point me in the right direction. Thanks!

Edit - I should have known to expect the Linux suggestions despite specifically asking about modifications to Windows. Linux is not an option due legacy software compatibility - they do more than use a browser.

I've had fun building a plucky little homelab on Proxmox 8.1.4 running kernel 6.5.13-1-pve. It's installed on an HP EliteDesk 800 G6 Desktop Mini PC, with the OS installed on a SATA SSD, there being a 4tb NVME btrfs pool, and there being multiple HDD's connected via USB3. Services are run an an LXC that has Docker installed, a couple other application specific LXC's, and a VM for HAOS.

A persistent issue I haven't been able to solve for is absolutely terrible network upload speeds. Sending files over the network to the server is generally fine, however retrieving files from the server is severely limited. 1-3 MB/s. It's bad enough that when streaming a movie through Jellyfin, attempting to copy a file from the server at the same time causes the movie to hang while Jellyfin attempts to buffer. I access many of the services locally through a domain name I own (combo of pihole local DNS and NGINX proxy manager), however these network speed issues persist even when connected directly by IP. The issue also persists when accessing the files through an LXC.

It is not a disk access issue - regardless of whether it is the HDD or any of the SSD's being accessed the results are the same. There are two NICs - one built, and a HP specific add in card the Intel I225-V. The issue persists on both.

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (11) I219-LM [8086:0d4c]
DeviceName: Onboard Lan
Subsystem: Hewlett-Packard Company Ethernet Connection (11) I219-LM [103c:870f]
Flags: bus master, fast devsel, latency 0, IRQ 126
Memory at e1400000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: e1000e
Kernel modules: e1000e

03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03)
Subsystem: Hewlett-Packard Company Ethernet Controller I225-V [103c:87b9]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1000000 (32-bit, non-prefetchable) [size=1M]
Memory at e1100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number c0-18-03-ff-ff-65-2f-06
Capabilities: [1c0] Latency Tolerance Reporting
Capabilities: [1f0] Precision Time Measurement
Capabilities: [1e0] L1 PM Substates
Kernel driver in use: igc
Kernel modules: igc

Running iperf3 on the built in NIC (clients is a laptop connected by wifi) demonstrates the issue: Client side sending data to the server is fine and probably wifi limited, while uploads from the server are significantly slower.

# iperf3 -c IP

[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  18.2 MBytes   153 Mbits/sec    0    841 KBytes
[  5]   1.00-2.00   sec  25.9 MBytes   217 Mbits/sec    0   2.12 MBytes
[  5]   2.00-3.00   sec  30.0 MBytes   252 Mbits/sec    0   3.17 MBytes
[  5]   3.00-4.00   sec  33.4 MBytes   280 Mbits/sec    0   3.17 MBytes
[  5]   4.00-5.00   sec  32.2 MBytes   271 Mbits/sec    0   3.17 MBytes
[  5]   5.00-6.00   sec  28.1 MBytes   236 Mbits/sec    0   3.17 MBytes
[  5]   6.00-7.00   sec  33.9 MBytes   284 Mbits/sec    0   3.17 MBytes
[  5]   7.00-8.00   sec  33.8 MBytes   283 Mbits/sec    0   3.17 MBytes
[  5]   8.00-9.00   sec  31.9 MBytes   267 Mbits/sec    0   3.17 MBytes
[  5]   9.00-10.02  sec  28.9 MBytes   238 Mbits/sec   34   2.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec   296 MBytes   248 Mbits/sec   34             sender
[  5]   0.00-10.09  sec   296 MBytes   246 Mbits/sec                  receiver

# iperf3 -c IP -R

[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  10.1 MBytes  84.9 Mbits/sec
[  5]   1.00-2.00   sec  12.4 MBytes   104 Mbits/sec
[  5]   2.00-3.00   sec  9.62 MBytes  80.7 Mbits/sec
[  5]   3.00-4.00   sec  4.50 MBytes  37.7 Mbits/sec
[  5]   4.00-5.00   sec  2.88 MBytes  24.1 Mbits/sec
[  5]   5.00-6.00   sec  3.12 MBytes  26.2 Mbits/sec
[  5]   6.00-7.00   sec  5.88 MBytes  49.3 Mbits/sec
[  5]   7.00-8.00   sec  4.50 MBytes  37.8 Mbits/sec
[  5]   8.00-9.00   sec  5.62 MBytes  47.2 Mbits/sec
[  5]   9.00-10.00  sec  5.12 MBytes  43.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec  64.9 MBytes  54.4 Mbits/sec  501             sender
[  5]   0.00-10.00  sec  63.8 MBytes  53.5 Mbits/sec                  receiver

Similarly, when running on the I225-V:

# iperf3 -c IP

[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  32.0 MBytes   268 Mbits/sec    0   1.57 MBytes
[  5]   1.00-2.00   sec  33.6 MBytes   282 Mbits/sec    0   2.62 MBytes
[  5]   2.00-3.00   sec  36.5 MBytes   306 Mbits/sec    0   3.13 MBytes
[  5]   3.00-4.00   sec  38.1 MBytes   320 Mbits/sec    0   3.13 MBytes
[  5]   4.00-5.00   sec  36.1 MBytes   303 Mbits/sec    0   3.13 MBytes
[  5]   5.00-6.00   sec  33.2 MBytes   279 Mbits/sec    0   3.13 MBytes
[  5]   6.00-7.00   sec  28.5 MBytes   239 Mbits/sec    0   3.13 MBytes
[  5]   7.00-8.00   sec  32.6 MBytes   274 Mbits/sec    0   3.13 MBytes
[  5]   8.00-9.00   sec  32.2 MBytes   270 Mbits/sec    0   3.13 MBytes
[  5]   9.00-10.00  sec  35.1 MBytes   294 Mbits/sec    0   3.13 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   342 MBytes   287 Mbits/sec    0             sender
[  5]   0.00-10.02  sec   340 MBytes   285 Mbits/sec                  receiver

# iperf3 -c IP -R

[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  21.4 MBytes   179 Mbits/sec
[  5]   1.00-2.00   sec  6.50 MBytes  54.5 Mbits/sec
[  5]   2.00-3.00   sec  4.38 MBytes  36.7 Mbits/sec
[  5]   3.00-4.00   sec  6.62 MBytes  55.6 Mbits/sec
[  5]   4.00-5.00   sec  9.75 MBytes  81.8 Mbits/sec
[  5]   5.00-6.00   sec  6.50 MBytes  54.5 Mbits/sec
[  5]   6.00-7.00   sec  4.75 MBytes  39.8 Mbits/sec
[  5]   7.00-8.00   sec  3.88 MBytes  32.5 Mbits/sec
[  5]   8.00-9.00   sec  8.00 MBytes  67.1 Mbits/sec
[  5]   9.00-10.00  sec  7.88 MBytes  66.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec  83.2 MBytes  69.8 Mbits/sec  530             sender
[  5]   0.00-10.00  sec  79.6 MBytes  66.8 Mbits/sec                  receiver

Many of the issues that I've seen around the I225-V have to do with power management and it dropping network connection after time - that is not an issue here. I'm grateful for any leads or further troubleshooting steps.

I'm wondering if anyone is aware of a tool that could work as an internet connected dementia clock - that is displaying the time, time of day, date, and the ability to update the display remotely with reminders, notes, and messages.

I have an old iPad kicking around, which could save us from purchasing something like this.

Thanks in advance!

Is there any reason why there don't seem to be any releases of Persona 5 for the PC? Anything I find is either Nintendo Switch or PS3 packaged alongside emulators. Does it really come down to the dramatic Denuvo cracker not bothering to have a go at this one?

Hello! I finally decided to tackle a problem I've been putting off for some time, and got myself part of the way there but am now stuck, and hoping to find some assistance/information/nudge in the right direction.

The Goal

I am looking to have my services reached at the same url on both my internal network and externally (e.g. https://sub.domain.com).

The Setup

• Proxmox Host
  • LXC running NPM with its own IP
  • LXC running Docker with its own IP, and services each have a different port
  • VM for Home Assistant
• SBC running Pihole + unbound

The current workflow looks like:

1. Router points to Pihole as the DNS server for all network devices.
2. Pihole has local DNS records that redirect specific subdomains to the NPM LXC (I don't use a wildcard *.domain.com because some subdomains are hosted outside of my network, though they are outside the scope of this post).
3. NPM has Proxy Hosts that are set up using HTTP to the Docker services on the 2nd LXC.
4. Cloudflare tunnels are set up to point the same subdomains, when accessed externally, to the NPM LXC. As a bonus Cloudflare tunnels also handles the DDNS, zero trust (2FA) applications, and SSL.

The Problem

The current set up results in internal access taking place over HTTP while external access takes place over Cloudflare tunnels' HTTPS. This causes problems for some phone applications that require spelling out the connection type during set up, or even some applications that only allow access over HTTPS even when it's on the same network (looking at you Quillpad and Nextcloud Cookbook).

The Ask

I am not familiar with the steps that would be required to adjust my current set up such that all services accessed on my home network would connect over HTTPS. I am aware that external access over Cloudflare tunnels causes some wrinkles in using NPM's standard Let's Encrypt certificate & DNS challenge, which I believe means I need to use a certificate provided by Cloudflare. However, between Edge/Client/Origin/etc certificates, I am not sure what would get used and how that needs to be configured in NPM.

Any advice, reading material, video walkthroughs, etc is most welcome. Thank you in advance for any help!

I am wondering what can be done in Linux to reduce CPU power consumption. In Windows, I'm familiar with setting and testing power limits and undervolting using Throttlestop (amazing tool), but to my knowledge no such tool (command line or otherwise) exists for Linux.

I've recently acquired an HP Mini G6 with a full fat i7 10700, which came as a surprise as it was advertised as 10700T when I went to pick it up.

I was after the T CPU due to the lower power consumption for an always on home server that sees occasional use (media server, file sharing, image backup, etc)

Also, I don't actually know if the idle power consumption between the 10700 and the 10700T is actually any different, or if the T only prevents the CPU from boosting as hard - if anyone could clear that up! Cheers.